|
|
| Printer model |
Part number |
| HP
LaserJet 1018 printer |
CB419A |
Minimum system requirements
The HP LaserJet 1018 printing-system software has the
following minimum system requirements:
-
Processor and RAM requirements:
-
Windows 98SE and Windows ME: a computer with
at least a Pentium 166 MHz processor and 32
MB or RAM
-
Windows 2000: a computer with at least a
Pentium 166 MHz processor and 64 MB or RAM
-
Windows XP: a computer with at least a
Pentium 233 MHz processor and 128 MB or RAM
-
150 MB or more of free hard-disk space
-
CD-ROM drive (required for installation)
-
Works with USB and Hi-Speed USB systems and cables
Print cartridges
The HP LaserJet Q2612A print cartridge provides fast
printing at 12 pages per minute (ppm) for the HP LaserJet
1018, 15 pages per minute for the HP LaserJet 1020, or 19
ppm for letter-size paper for the HP LaserJet 1022.
Printer capacities and ratings
| |
NOTE: |
This product is NOT supported in a Macintosh
environment. |
|
Print speed |
12 ppm for A4 and 12 for letter
First page out in as low as 10 seconds |
|
Main input tray capacity |
150 sheets of regular weight 75 g/m 2
(20 lb paper)
|
|
Priority feed slot capacity |
1 sheets of media up to 163 g/m 2 (43
lb)
|
|
Top (face down) output bin capacity |
100 sheets of regular weight 75 g/m 2
(20 lb paper)
|
|
Media weight |
Output bin: 60 to 105 g/m 2 (16 to 28
lbs)
|
|
Base memory |
2 MB of RAM |
|
Print resolution |
600 x 600 dpi with HP Resolution Enhancement
technology (REt).
1200 dpi effective output quality (600 x 600 x 2
dpi with HP Resolution Enhancement technology (REt)). |
|
Duty cycle |
3,000 single-sided pages per month (maximum)
1,000 single-sided pages per month (average) |
Supported paper sizes
The printer supports media within this size range:
|
Paper type |
Metric |
English |
|
Letter |
216 x
279 mm |
8.5 x
11 in |
|
Legal |
216 x
356 mm |
8.5 x
14 in |
|
Executive |
184 x
267 mm |
7.25 x
10.5 in |
|
A4 |
210 x
297 mm |
8.25 x
11.75 in |
|
COM10
envelopes |
105 x
241 mm |
4.13 x
9.5 in |
|
DL
envelopes |
110 x
220 mm |
4.33 x
8.67 in |
|
C5
envelopes |
162 x
229 mm |
6.4 x
9 in |
|
B5
envelopes |
176 x
250 mm |
6.9 x
9.85 in |
|
Monarch envelopes |
98.5 x
191 mm |
3.88 x
7.55 in |
|
Labels |
216 x
279 mm |
8.5 x
11 in |
|
Custom-size media |
custom
(within acceptable range) |
custom
(within acceptable range) |
| |
NOTE: |
Narrow and heavy media can cause the printer to
print more slowly. |
Environmental specifications
|
Operating environment |
Install in a well-ventilated, dust-free area.
Printer plugged into an AC outlet:
-
Temperature: 10°C to 32.5°C (50°F
to90.5°F)
-
Humidity: 20% to 80% (no condensation)
|
|
Storage environment |
Printer unplugged from an AC outlet:
-
Temperature: 0°C to 40°C (32°F to 104°F)
-
Humidity: 10% to 80% (no condensation)
|
Material Safety Data Sheets
Material Safety Data Sheets (MSDS) for supplies containing
chemical substances (for example, toner) can be obtained by
contacting the HP web site at: http://www.hp.com/go/msds or
http://www.hp.com/hpinfo/community/environment/productinfo/safety.
Acoustic emissions
Acoustic emissions¹
|
Sound power level
|
Declared per ISO 9296
|
|
Printing 2
|
L
WAd=<6.2 Bels (A) and 62dB (A)
|
|
Ready
(PowerSave) |
Inaudible |
|
Sound pressure level, bystander position
|
Declared Per ISO 9296
|
|
Printing 2
|
L
WAd= ≤4.9 Bels (A) and 49dB (A)
|
|
Ready
(PowerSave) |
Inaudible |
|
1Configuration tested: HP LaserJet
1018 base unit, standard tray, A4 paper, and
simplex continuous print.
|
|
2HP LaserJet 1018 speed is 12 ppm for
A4 media and 12 ppm for letter media.
|
Electrical specifications
|
WARNING:
|
Power requirements are based on
the country/region where the printer is sold. Do
not convert operating voltages. Doing so might
damage the printer and void the product
warranty. |
| |
110-volt models |
230-volt models |
|
Power
requirements |
110-127v (±10%)
50/60 Hz (±2 Hz) |
220v-240v (±10%)
50/60 Hz (±2 Hz) |
|
Rated
current |
3.5
amps |
2.0
amps |
Power consumption (average, in watts)¹
|
Product model |
Printing 3
|
Ready
2, 4
|
Off |
|
HP
LaserJet 1018 |
250 W |
2 W |
0 W |
|
1Power reported is the highest value
measured for monochrome printing using all
standard voltages.
|
|
2The default time from Ready mode to
PowerSave mode and the recovery time from
PowerSave mode to the start of printing is
negligible (less than 10 seconds) because of the
instant-on fusing.
|
|
3HP LaserJet 1018 speed is 12 ppm for
A4 media and 12 ppm for letter media.
|
|
4The heat dissipation in Ready mode
is 20 BTU/hour.
|
Physical specifications
|
Dimensions |
-
Width: 370 mm (14.6 inches)
-
Depth: 242 mm (9.5 inches)
-
Height: 209 mm (8.2 inches)
|
|
Weight
(2,000-page cartridge installed) |
5.8 kg
(12.8 lb) |
Printer capacities and ratings
|
Print
speed |
-
12 ppm for A4 media and 12 ppm for
letter media
-
First page out in as low as 10 seconds
|
|
Main
input tray capacity |
150
sheets of regular weight 75 g/m 2 (20
lb) paper
|
|
Priority feed slot capacity |
1
sheet of media up to 163 g/m 2 (43
lb)
|
|
Top
(face down) output bin capacity |
100
sheets of regular weight 75 g/m 2 (20
lb) paper
|
|
Minimum paper size |
76 x
127 mm (3 x 5 inches) |
|
Maximum paper size |
216 x
356 mm (8.5 x 14 inches) |
|
Media
weight |
Output
bin: 60 to 105 g/m 2 (16 to 28 lbs)
|
|
Base
memory |
2 MB
of RAM |
|
Print
resolution |
-
600 x 600 dpi with HP Resolution
Enhancement technology (REt)
-
1200 dpi effective output quality (600 x
600 x 2 dpi with HP Resolution Enhancement
technology [REt])
|
|
Duty
cycle |
-
3,000 single-sided pages per month
(maximum)
-
1,000 single-sided pages per month
(average)
|
|
|
Every bundle will be shipped with free USB lead
|
